Electronic DIN Type Abrasion Test Instrument with Competitive Price

• Customization: Available
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Model NO.: HD-P307
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Certificate: ISO9001: 2008
• Warranty Period: 12 Months
• Wheel Diameter: 150mm
• Wheel Length: 460mm
• Specimens Size: 16mm, 6-15mm (D)
• Fixture Load: 2.5n
• Weight Load: 2.5n, 5n
• Fixture Lateral Displacement: 4.2mm/Wheel Each Lap
• Wheel Rotate Speed: 40rpm
• Travel Reservations: 40m/20m
• Transport Package: Strong Wooden Case
• Specification: ISO9001: 2008
• Trademark: Haida
• Origin: China
• Production Capacity: 80 Sets/Month

Product Description

                    Electronic DIN Type Abrasion Test Instrument With Competitive Price

Product Description

Product introduction:
Din Type Abrasion Test Instrument applies to the abrasion test of resilient material, rubber, tyre, transport belt, synthetic leather. It's effictive and esay to operate.

Standard Parameters:

Model	HD-P307
Specimens size	16mm, 6-15mm (D)
Fixture load	2.5N
Weight load	2.5N, 5N
Fixture lateral displacement	4.2mm/wheel each lap
wheel diameter	150mm
wheel length	460mm
wheel rotate speed	40rpm
Travel reservations	40m/20m
Abrasion speed	0.32m/sec
Dip angle	3° the angle of the specimen   back shaft with vertical roller face

Principle:
At a predetermined contact pressure and a given area, the sample and the sandpaper into a certain angle, the measurement sample at a certain level of friction generated on the abrasive wear resistance.
Sandpaper attached to the surface of the roller package, the sample is pressed against the drum with the sandpaper, so that the lateral movement of the drum sample.
Wear the sample in the cylindrical end of the generation, measurement value of the sample mass loss, calculate the volume density of the sample by the amount of wear.

According to the standard
This instrument reference standard: DIN-53516, ISO-4649, GB / T 9867.



Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.

After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.