Rapid-rate Test Chamber/ Fast Change Rate Test Chamber
Product Description
This chamber is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properties of product. Normally the temperature rate is less than 20C/min, which can achieve the real application environment of testing sample by the fast ramp rate.
Applications
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, and drying test…
Test Standard
IEC60068-2-14 Change of temperature with specified rate of change
Main Parameters
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
| Item |
Specification |
| Internal dimension(W*D*H) |
400*500*500mm |
| External dimension(W*D*H) |
600*1080*1380mm |
| Working capacity |
100 liter |
| Internal chamber material |
SUS#304 stainless steel, mirror finished |
| External chamber material |
Stainless steel with paint spray |
| Temperature range |
-70ºC~+180ºC |
| Temperature fluctuation |
±1C |
| Humidity range |
10%~98%RH |
| Humidity fluctuation |
±2.5%RH |
| Humidity uniformity |
3%RH |
| Sample tray |
SUS#304 stainless steel, 2pcs |
| Observation window |
Tempered glass: 250*300mm |
| Testing hole |
Diameter 50mm, for cable routing |
| Power supply source |
Three-phase, 380V, 50Hz |
| Safety protection device |
Protection for leakage
Over-temperature
Compressor over-voltage and overload
Heater short circuit |
Temperature Ramp System (heating & cooling)
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
| Model |
HD-E708-100 |
| Cooling speed (+85ºC~-40ºC) |
15ºC/min, linear line or non-linear control (without loading) |
| Heating speed (-40ºC~+85ºC) |
15ºC/min, linear line or non-linear control (without loading) |
| Refrigeration Unit |
System |
Air-cooled |
| |
Compressor |
France Tecumseh |
| |
Expansion system |
Electronic expansion valve |
| |
Refrigerant |
R404A, R23 |
Chamber Design Features
1. Has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application;
2. The door equipped with hinges preventing auto-closing;
3. Can designed to comply with major environmental test standards like IEC, JEDEC, SAE...
4. This chamber is safety tested with CE certificate.
Programmable Controller
1.Adopts Japan UMC100 programmable touch screen controller for easy and stable operation
2.Step types include: ramp, soak, jump, auto-start, and end
Water cooling Tower/ Water Cooling Chiller
The Introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
After-service:
1.Consultation service
Professional training for every Haida Lab consultant, they know the requirements and steps you need to take to ensure the Lab solutions feasibility.
2. Remote technical support
Life time technical support for customers, Onsite service is optional. Save time and increase productivity by combining technical support with remote communication.
3. Technical training service
Professional Technical training by Haida qualified engineer
4. On-site installation services
Haida provides comprehensive equipment installation services in conjunction with calibration. Installation services are available with any of flexible delivery options.
5. Instrument maintenance and calibration service
Haida delivers the most comprehensive suite of calibration, test and repair services in the industry. We provide a cost-effective calibration services that encompasses a wide-range of verifiable, preventive maintenance options.
Audited Supplier 
){kind=link}