Laboratory DuPont Impact Resistance Tester For Paint And Coating Materials
Product Introduction:
Dupont impact testing machine aims to test the impact endurance of coating material after coated. The coating face of specimen face up, connect with specified radius Impact Head, use a certain Weight to impact the Impact Head on a fixed height, after impacted, check the damage of coating or deformation.
To do an impacting test for painting and coating materials is to use an impacting head with various round angles to touch the specimen in the beginning, and then a selected weight free dropping from a certain height to hit the impacting head to impact the specimen. Running the same way to test three more specimens, and put and leave them for an hour, and then watch if there is crack on the painting.
Technical Parameters:
| Item |
Specifications |
| Maximum impact energy |
3J |
| General materials |
Paint test strips, plastic test strips |
| Maximum height |
50~500mm, 50~1000mm (optional) |
| Falling control method |
Manual setting |
| Impact head radius |
1/2,1/4,3/16,1/8,1/16in 7.9mmR(5/16"R) |
| Impact plane radius plane |
1/4,3/16,1/8,1/16in 8.1mmR, 15mmR |
| Counterweight |
1 each for 300,500,1000g, 1 each for 1000g and 2000g |
| Volume (approximate) |
50cm×50cm×150cm |
The DuPont impact test machine should not be used in the following occasions:
1. In the occasion of vibration and swing.
2. Places in direct sunlight.
3. Places with high temperature, dust and humidity.
4. The AC power supplied to the machine should be well grounded to ensure safe use.
5. It is strictly forbidden to use strong solvents (such as benzene and nitro oil) to clean the machine.
6. Water and debris must not be injected into the machine to prevent damage to electrical components and electric shock.
7. The disassembly, assembly and debugging of the instrument display can only be carried out by the unit approved by the National Metrology Department and our company.
Our Company Introduction:
HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Audited Supplier 
){kind=link}