Electronic Stainless Steel Plate Temperature & Humidity Testing Chamber (HD-150T)Product description:
Temperature & Humidity Weathering Testing Chamber is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance.
Constant temperature and humidity testing chamber can simulate various of temperature and humidity environment, which is applicable to detecting electronic, automobile, rubber, plastic, metal and other products in a variety of adverse circumstances, such as parameters of reliability and stability. It will be made available to you to predict and improve the basis of product quality and reliability.Function and features:
1, The test machine is mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products, parts and materials in the high and low temperature alternating hot and humid environment when storage, transport and using;
2, It is an reliable test equipment for all kinds of electronic, electrical, electronics, plastics raw materials and devices to do testing such as cold, heat, moisture, resistance to dry and the quality control;
3, Especially suitable for optical fiber, LCD, crystal, inductor, PCB, batteries, computers, mobile phones, rubber, plastics and other product.
4, It has the features of newly perfect design, appearance of high texture level, system extracts Japan, West Germany, the essence of design and manufacture adopt advanced technology.
5, Balanced temperature humidity control system (BTHC), to PID mode control SSR, so that heated humidification system was equal to heat loss capacity, it could be used long-term stability;
6, All-capillary, automatic load capacity adjustment system technology, more expansion valve system more stable and reliable, precise temperature and humidity control, heating and cooling rate of rapid, steady, uniform, saving valuable time for users.
7. Use more powerful wing-blower air supply cycle, to avoid any dead end, temperature and humidity are evenly distributed in the test region.
8. Wind-road cycle adopted the design of blowing side wind and return wind. Wind pressure and wind speed are in accord with test standards, and make the door instantaneous temperature and humidity open that is stabilized time soon.
9. Heating, cooling, humidification and dehumidification system is totally unaided to improve efficiency, reduce testing cost, increase life expectancy and lower failure rate.Standard features
|Internal dimension||(W*D*H) 600*800*850mm |
|External dimension||(W*D*H) 1100*1370*1750mm|
|Humidity range||20~98%R.H. (Refer Image below)|
|Cooling speed||1ºC/min in average (without loading)|
|Heating speed||3ºC/min in average (without loading)|
|Internal chamber material||SUS#304 stainless steel, mirror finished|
|External chamber material||Stainless steel with paint spray|
|Cooling method||Air cooling|
|Controller||Korea TEMI 880 controller|
LCD touch screen, programmable control temperature and humidity
Can set different parameter for cyclic test
|Insulation material||50mm high density rigid Polyurethane foam|
|Heater||Explosion-proof type SUS#304 stainless steel fins radiator pipe heater|
|Compressor||France Tecumseh compressor|
|Temperature sensor||PT-100 dry and wet bulb sensor|
|Observation window||Tempered glass|
|Testing hole||Diameter 50mm, for cable routing|
|Safety protection device||Protection for leakage|
Compressor overvoltage and overload
Heater short circuit
1, Display: Chinese and English touch / touch-screen
2, Test mode: High and low temperature operation and storage, temperature cycling, high temperature and high humidity, low temperature and humidity, condensation experiment.
3, Control panel: Humidity controller +Temperature Controller + lighting + power button + button + buzzer alarm.CHAMBER DESIGN FEATURES
- High performance and quiet operation (68 dBA)
- Space-saving designed for flush installation to wall
- Full thermal break around doorframe
- One 50mm diameter cable port o left, with flexible silicone plug
- Direct water supply connection for continuous operation
- Accurate wet/dry-bulb humidity measurement system for easy mantain
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
24 Hours online service for your consult.
Help choose right model,and a series of service,person,advise. main web site:http://www.haidatestequipment.com/
2. Middle service
--Give you best offer
--Provide discount for many sets order
--Do customer's request:
--Choose payment term you convienent.
--Promptly production and delivery,inform you in time.
--Can provide invoice value as you like to decrease your tax.
3. After sale service
--1 year warranty service and all life maintenance.
--Technical Egineer are avalible for oversea trainning.
--Free change for some parts
--Remote control technical consult
--Free installation DVD
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.