Automatic Corrosion Aging Salt Spray Tester for Metal and Steel

Product Description

Automatic Corrosion Aging Salt Spray Tester For Metal And Steel

Product Description

Introduction:
Programmable used salt spray chamber is applicable for various kinds material's surface treatment, such as after coating, electroplate, inorganic and organic membrane dermails, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product .

Design Standard:
CNS:3627,3385,4159,7669,8886;
JIS:D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: 8117,B268.

Usage:
Salt spray tester adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

Chamber Structure:
1. Salt spray chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample. 
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.

Main Features:

Model	HD-E808-90
Inner Box Size (L× W× H)	90× 60× 50 cm
Outside Box Size(L× W× H)	141× 88× 128 cm
Equipment Material	Both inside & outside shell of salt spray chamber adopt imported P. V. C    rigid plastic board, and tank cover uses imported transparent  P. V. C.       rigid plastic board
Temperature Range	35  centigrade degrees to 55 centigrade degrees
Temperature Fluctuations	≤ ± 0.5 centigrade degrees
Temperature Uniformity	≤ ± 2 centigrade degrees
Temperature Precision	± 1 centigrade degrees
Test Chamber  Temperature	Salt Spray Method (NSS ACSS)35± 1 centigrade degrees   Corrosion-resistant Testing Method (CASS) 50± 1 centigrade degrees
Saturated air Barrel Temperature	Salt Spray Method (NSS ACSS)47± 1 centigrade degrees Corrosion-resistant Testing Method (CASS) 63± 1 centigrade degrees
Brine Temperature	35 centigrade degrees± 1 centigrade degrees
Spray Quantity	1.0~2.0 ml / 80cm2 / hr
PH	Salt Spray Method (NSS ACSS6.5~7.2)   Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume	270L
Brine Tank Capacity	25L
Power	AC220V, 10A
Multiple Safety Protection Devices	Current discharge protection, over pressure protection, over     temperature protection, over load fuse protection
Accessories	Testing Salt/ Measuring tank/ Equipment  each 1 set
Standard	CNS: 3627, 3385, 4159, 7669, 8886;   JIS: D0201, H8502, H8610, K5400, Z2371;   ISO: 3768, 3769, 3770;   ASTM: B-117, B268

Features:

Model	HD-E808-60A-1	HD-E808-90A-1	HD-E808-120A-1
Inner box size: (L×W×H) cm	60×40×45	90×60×50	120×100×50
Outside box size: (L×W×H)cm	107×60×118	141×88×128	190×130×140
Equipment material:	Both internal and external material is using imported P.V.C rigid plastic board; the case cover is using transparent rigid plastic board P.V.C.
Temperature range:	35°C~55°C
Temperature fluctuations:	≤±0.5°C
Temperature uniformity:	≤±2°C
Temperature precision:	±1°C
Test chamber temperature	NSS ACSS 35±1°C CASS:50±1°C
Saturated air barrel temperature:	NSS ACSS 47±1°C CASS 63±1°C
Brine temperature:	35°C±1°C
Spray quantity:	1.0~2.0 ml / 80cm2 / hr
PH:	NSS ACSS6.5~7.2     CASS 3.0~3.2
Lab volume:	108L	270L	600L
Brine tank capacity:	15L	25L	40L
Power:	1AC220V,10A	1AC220V,15A	AC 1,220V,30A
Multiple safety protection devices:	Water shortage/ over temperature / phase protection
Standard accessories:	Test salt, measure bucket, tool etc 1 set

 
Purpose: 
Programmable Salt Spray chamber is applicable for the salt spray corrosive test for the protection layer of components,parts, electronic and electrical parts and metal materials and industrial products. Salt Spray Test Instrument
   
Control System:
High precision P.I.D.temperature control meter with its error ±0.1°C.
 
Features:
 1  Durable hard PVC construction, anti-corrosion, easy to clean.
 2  Reservoirs with mixing system on stand.
 3  Cabinet heated by water jacket, heating element from USA famous company.
 4  Separate heating system, be apart from salt testing chamber to ensure accurate result and protect circuit.
 5  Exposure zone lined with corrosion-resistant PVC sheets.
 6  Clear cover allows viewing of test conditions.
 7  Peaked cover prevents dripping of condensation onto samples.
 8  Water seal and water level protection system.
 9  Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
10  Automatic DI water fill to humidifying tower.
11   Digital temperature control and readouts.
12   Integral over-protection on all heaters.
13   Low water cut-off protection on humidifying tower.

Images: 


The Introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.

Our Service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
1. Pre-service
    24 Hours online service for your consult.
    Help choose right model,and a series  of service,person,advise. main web site:http://haidaequipment.en.made-in-china.com    
2. Middle service
    --Give you best offer
    --Provide discount for many sets order
    --Do customer's request:
    --Choose payment term you convienent.
    --Promptly production and delivery,inform you in time.
    --Can provide invoice value as you like to decrease your tax.    
3. After sale service 
   --1 year warranty service and all life maintenance.
   --Technical Egineer are avalible for oversea trainning.
   --Free change for some parts
   --Remote control technical consult
   --Free installation DVD
   --Maintenance plan
4,Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
5,Good Packaging:  
Good Packaging:  Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.