Microcomputer Control Simulation High Altitude Low Air Pressure Test Chamber
Description:
Low pressure test chamber is mainly used in aviation, aerospace, information, electronics and other fields, instruments and meters, electric products, materials, parts, equipment at the same time in the low pressure, high temperature, low temperature single or under the action of the environmental adaptability and reliability of the test, and or electric performance parameters for the specimen electricity measurement, adopt and composite structure form, the test chamber by is located in the front of the heat preservation box (confined structure), located at the back of the refrigeration, located on the chamber door vacuum unit and the electrical controller (system)
Features:
1.High performance and quiet operation
2.Space-saving designed for flush installation to wall
3.External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of 4.heating, refrigerating system
5.Adopts international brand of imported parts for cooling system to improve operation reliability
6.High precision and stable performance with touch screen controller, friendly Man-Machine interface.
7.Multiple layers of safety device to easy maintenance.
Applications
1.To simulate test environment with various altitude environments .
2.It is especially important for defense and aerospace applications where pressure and vacuum 3.conditions are even more intense
Application fields: Include Aviation, aerospace, communications, electronics, electrical appliances etc.
4.Test Purpose: to guarantee the maximum quality and reliability while products or material might encounter at various altitude levels.
Standard Features:
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
| Internal dimension (W*D*H) |
1000*1000*1000mm |
| Temperature range |
-70~+100ºC(no load);-55~+100ºC(with load) |
| Temperature fluctuation |
±0.5ºC |
| Temperature uniformity |
±2ºC |
| Ambient Humidity |
≤85%RH |
| Cooling speed |
≥1ºC/min in average (with loading 15kg,+85ºC~-55ºC ) |
| Heating speed |
1ºC/min in average (with loading,-55ºC~+85ºC) |
| Pressure Range |
101Kpa~1Kpa |
| Pressure Accuracy |
±5% |
| Pressure Control Method |
Adjust temperature first, then pump vacuum |
| Internal chamber material |
Steel plate with plastic spray |
| External chamber material |
Stainless steel |
| Cooling method |
Water Cooler |
| Controller |
LCD touch screen, programmable control temperature and Pressure
Can set different parameter for cyclic test |
| Insulation material |
Compound material without sweating, special for low pressure |
| Heating Method |
Electrical |
| Compressor |
Imported new generation with low noise |
| Safety protection device |
Protection for leakage
Over-temperature
Compressor over voltage and overload
Heater short circuit |
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
Product Details
Main Standards
GB2423.25-1992
GB2423.26-1992
GJB150.3A-2009
GJB150.4A-2009
GJB150.2A-2009
GJB5170.10-200
The Introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
After-service:
1.Consultation service
Professional training for every Haida Lab consultant, they know the requirements and steps you need to take to ensure the Lab solutions feasibility.
2. Remote technical support
Life time technical support for customers, Onsite service is optional. Save time and increase productivity by combining technical support with remote communication.
3. Technical training service
Professional Technical training by Haida qualified engineer
4. On-site installation services
Haida provides comprehensive equipment installation services in conjunction with calibration. Installation services are available with any of flexible delivery options.
5. Instrument maintenance and calibration service
Haida delivers the most comprehensive suite of calibration, test and repair services in the industry. We provide a cost-effective calibration services that encompasses a wide-range of verifiable, preventive maintenance options.
Audited Supplier 
){kind=link}