Programmable Logic Control Knife Cutter Test Instrument

• Customization: Available
• Type: Knife Sharpness Ability Testing Machine
• Maxcapacity: <1000KN
• Model NO.: HD-M013
• Load Way: Electronic Load
• Display: Digital
• Weight: 500-1000Kg
• Power Source: AC110V
• Cutting Stroke: 20 to 60 mm (Standard Requirement Is 40 mm)
• USA Area: Cookware
• Travel Speed: Adjustable From 20 - 80 mm Per Second
• Movement Drive: Ball Screw and Servo Motor
• Test Cycles Setting: 4 Digits Pre-Set Counter
• Feature: Easy to Operate
• Controller: PLC (Programmable Logic Controller)
• Usage: Knives Test Machine,Knives Sharpness Tester
• Model: HD-M013
• Use Area: Cookware
• Transport Package: Strong Wooden Case
• Specification: ASTM, EC
• Trademark: Haida
• Origin: China
• Production Capacity: 10sets / Month

Product Description

Programmable Logic Control Knife Cutter Test Instrument

 
Product Description:
 
 
Principle:
 
The blade is mounted in a position with the edge vertical and a pack of specially developed synthetic paper (Not included) is lowered on to knives sharpness tester. The clamping fixture with the blade move back and forth the blade cuts into the paper, the depth of the cut being the measurement of sharpness.
 
- ICP (Initial Cutting Performance) representing the cutting ability (sharpness) of the blade as supplied
- CC (Total Card Cut) cutting edge retention) which represents the life of the blade by giving a measure of its total cutting ability  
 
 
The Main Technical Parameter: 

1) The reciprocating table with fixture to clamp the blade,  
     the movement was driven by ball screw and servo motor.

2) Cutting stroke is settable from 20 to 60 mm.
    (standard requirement is 40 mm)

3) Travel speed is adjustable from 20 to 80 mm per second.
    (Standard requirement is 50  mm/second)

4) 4 digits pre-set counter for test cycles setting.

5) Linear optical scale to detect each cutting depth of each single stroke
    ( forward and backward)

6) The tester use PLC (programmable logic controller) and large touch screen monitor for
    display.

7) The cut depth was automatically recorded and accumulated, Total amount will be    
    displayed after finish the test cycles.

(The table parameters for the company Standard Model parameters, we support customer customization parameters)