Powder Coating Salt Spray Testing ChamberDescription:
Salt spray tester adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Continuous salt spray exposures are widely specified for testing components and coatings for corrosion resistance. Applications include plated and painted finishes, aerospace and military components, and electrical/electronic systems.
Most of these tests are performed to particular specifications such as ASTM B117 (Salt Spray). These tests are widely used for relative corrosion testing. They are typically run at an elevated temperature and do not incorporate a dry-off cycle. They require heated, humidified air for the spray. It has the advantages include the elimination of:
- manual moving of test specimens from one chamber to another
- laborious spraying of test specimens
- variability in results from excessive specimen handlingStandard Parameters
| Model|| HD-90|
| Inner Box Size (L× W× H)|| 90× 60× 50 cm|
| Outside Box Size(L× W× H)|| 141× 88× 128 cm|
| Equipment Material|| Both inside & outside shell of salt spray chamber adopt imported P. V. C rigid plastic board, and tank cover uses imported transparent P. V. C. rigid plastic board|
| Temperature Range|| 35 centigrade degrees to 55 centigrade degrees|
| Temperature Fluctuations|| ≤ ± 0.5 centigrade degrees|
| Temperature Uniformity|| ≤ ± 2 centigrade degrees|
| Temperature Precision|| ± 1 centigrade degrees|
| Test Chamber Temperature|| Salt Spray Method (NSS ACSS)35± 1 centigrade degrees|
Corrosion-resistant Testing Method (CASS) 50± 1 centigrade degrees
| Saturated air Barrel Temperature|| Salt Spray Method (NSS ACSS)47± 1 centigrade degrees|
Corrosion-resistant Testing Method (CASS) 63± 1 centigrade degrees
| Brine Temperature|| 35 centigrade degrees± 1 centigrade degrees|
| Spray Quantity|| 1.0~2.0 ml / 80cm2 / hr|
| PH|| Salt Spray Method (NSS ACSS6.5~7.2)|
Corrosion-resistant Testing Method(CASS)3.0~3.2
| Lab Volume|| 270L|
| Brine Tank Capacity|| 25L|
| Power||AC220V, 10A|
| Multiple Safety Protection Devices||Current discharge protection, over pressure protection, over temperature protection, over load fuse protection|
| Accessories|| Testing Salt/ Measuring tank/ Equipment each 1 set|
| Standard|| CNS: 3627, 3385, 4159, 7669, 8886;|
JIS: D0201, H8502, H8610, K5400, Z2371;
ISO: 3768, 3769, 3770;
ASTM: B117, B-117, B268
Product Features1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.