Constant Temperature and Humidity Tape Retentivity Tester

• Customization: Available
• Warranty: One Year
• Max Diameter of Workpiece: <500mm
• Model NO.: HD-C527
• Mass Scope of Workpiece: >20000kg
• Type: Test and Measurement Instruments
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Needle
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Temperature Range: - 40 Degree to 150 Degree
• Test Sample: 10 Pieces
• Controller: LCD Touch Interface
• Box Material: SUS 304 Stainess Steel
• Delivery Time: 15 Days After Receive The Deposit
• Load: 1kg
• Heat Preservation Material: Fine Glass Silk + PU Foam
• Material: SUS#304
• Thickness of The Steel Board: 1.5mm-2.0mm, Width; 40-50mm; Length: 60-125mm
• Transport Package: Strong Plywood Case
• Specification: CE, ISO
• Trademark: Haida
• Origin: Dongguan, China
• HS Code: 9024109000
• Production Capacity: 150 Sets/ Month

Product Description

Constant temperature and humidity tape retentivity tester

Product Description

This machine is mainly to test the adhesive resistance porperty and the holding adhesive property of the pressure sensitive tape.

The static loading test: Paste the tape to the testing board, timing for a period, and evaluate the holding adhesion property according to the distance the tape slips or the time it pastes.

And it can simulate the high temperature and high humidity/ high temperature and low humidity/ low temperature and high humidity/ low temperature and low humidity conditions. High standard procedure and control systems are attached, for good testing environment.





Standard Parameters:

Model	HD-C527
Material	SUS#304 stainless steel board for inner part, advanced paint coat for outside
Heat preservation  material	fine glass silk + PU foam
Thickness of the steel board	1.5mm-2.0mm, width; 40-50mm; length: 60-125mm
Material	SUS#304
Temperature range	-40 º C-150º C
Humidity range	20%RH-98%RH
Load	1kg
Precision	± 0.5º C; ± 2.5%RH( should be measured 30 minutes after the sensor is stable
Uniformity	± 0.5º C-± 2.0º C; ± 3%RH (should be measured at the positiion 1/6 away from the wall and 30 minutes after the sensor is stable.