LED Display Digital Moisture Content Analyzer

Product Description

                   LED Display Digital Moisture Content Analyzer

Product Description

Introduction:
This halogen Moisture meter is used to test moisture of all kinds of materials. This machine adopts heat gravimetric analysis principle: This machine tests specimen weight (including water) when start the test. Then, turn on the halogen heating and drying device built in the instrument to heat and dry tested specimen. In the process of the drying, the instrument tests weight of the specimen successively and displays lost moisture. After finish the test, the instrument can display moisture weight of the specimen or dried material weight as the last test result.

In the practical use, the most important factor is heating and drying speed. Compared to common infrared heating or drying oven method, needed time that use halogen to heat to reach maximum heating power is shorter. At the same time, this instrument can also use high temperature which is other factor to shorten drying time. So it can increase efficiency of moisture measurement.

Moisture meter
1. It adopts orbicular halogen heater
2. Rapid detection and intelligentize operation
3. Drying specimen quickly and equably
4. Can storage various of moisture determination methods
5. The standard interface can be linked to the peripheral equipment

Parameter:

Model	HD-A820-4
Load range	0~60g (designated 0~100g)
Minimum Load Readout	0.01g
Sample Weight	0.5~60g
Temperature Range	Room Temperature~180°c
Readability moisture content	0.01%
Parameters Display	7
Communications Interface	RS 232
Outside Dimension (L×W×H)	380×205×325 mm
Power Capacity	270W (at work) 20W (standby)
Power	220V ±10%
frequency	50Hz ±1Hz
Weight	3.7Kg

(The table parameters for the company Standard Model parameters, we support customer customization parameters)



Why choose us? 
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
 
2.Excellent After sale Service: 
18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
 
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
 
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.