Vibration Shaker Testing Equipment with Air-Cooled Electro-Dynamic Test System

• Customization: Available
• Type: Vibration Testing Machine
• Display: Digital
• Model NO.: HD-G826
• Control: Computer Control
• Power Source: AC380V
• Temperature Range: 0-40ºC
• Humidity: 0-90%, No Condensation
• Sine Force (Peak): 30kn
• Shock Force(Peak): 60kn
• Max. Velocity: 1.8 M/S
• Max. Acceleration: 75g
• Installation: Rubber Mat (Anchor Bolts Required)
• Power Requirements: 380V/3pH/50Hz, 40kVA
• Compressed Air Pressure: 0.6 MPa
• Transport Package: Each Set Protected with Resin Fiber and PP Film, T
• Specification: CE, ISO, SGS
• Trademark: Haida
• Origin: Guangdong, China
• HS Code: 9024800000
• Production Capacity: 150 Sets Per Month

Product Description

Vibration Shaker Testing Equipment With Air-cooled Electro-dynamic Test System

Product Description
Vibration Shaker Testing Equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.

Application
Widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. 



Features
Block Diagram

 
Shaker Body with Slip Table 

 Power Amplifier and Blower


Main Parameters 

Shaker
Sine force (peak)	30kN
Shock force (peak)	60 kN
Frequency range	5~2,600 Hz
Displacement (continuous)	100 mm
Max. Velocity	1.8 m/s
Max. Acceleration	75 G
Armature Diameter	445 mm
1st order resonant frequency	2,400 Hz
Allowable eccentric moment	>500 Nxm
Armature weight	40 kg
HE/ST screw dimension	M10 (metric)
Axial vibration isolation frequency	<3 Hz
Max. Payload	500 kg
Magnetic flux leakage	≤1 mT
Dimensions (L×W×H, unpacked)	1,330x860x1,250 mm
Weight (unpacked)	2,500 kg
Installation	Rubber mat (anchor bolts required)
Power Amplifier
Amplifier output	30 kVA
SNR	>65 dB
Rated output voltage	120 Vrms
Amplifier efficiency	> 90%
Dimensions (L×W×H, unpacked)	800x900x2,100 mm
Weight (unpacked)	500 kg
Blower
Air volume	0.46 m3/s
Power	7.5 kW
Air duct diameter	200 mm
Air pressure	8.8kPa
Installation	Able to connect to ceiling (up to two 90 degree bends), max 20' run
Horizontal Slip Table
Dimensions	600x600 mm
Thickness	45 mm
Frequency limit	2,000 Hz
Effective mass	54 kg
Note: 1. High pressure oil-film bearing is used for better uniformity.
Vibration Controller and Accelerometer
Vibration Controller VT-9008-4		4 Channel Vibration Controller with Sine and Self Calibration.
Accelerometer   EA-YD-181	100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable
Other supported functions/accessories
Environmental chambers	Supported
Mobile devices	Customizable
Insulation boards	Customizable
Fixture	Customizable
Working environment of the system
Temperature range	0-40ºC
Humidity range	0~90% , no condensation
Power requirements	380V/3ph/50Hz, 40kVA
Compressed air pressure	0.6 Mpa

Dimensions For Reference Only

Characteristics
Ultra mute work; The machine base uses the high quality material, installs conveniently, the operation is smooth, does not need to install the The, the control circuit digitization control and the display frequency, the PID adjusts the function, causes the equipment work to be more stable, reliable, sweeps the frequency and the fixed frequency operation way, adapts to the different profession test request To solve the interference of the strong electromagnetic field to the control circuit, and to increase the working time set, so that the test product reaches the accurate test time.

How to Use

1. the control manual to complete the procedure

2. such as Operation error so that can not work, you can use the recovery method of the steps of the input, and then set a single group or other running steps.

3. before use to press the external start switch, appears COO namely lets go, opens the key.

4. Taiwan Body:

    1) The table body foot sleeve as far as possible fixed

    2) power supply on/work in the output line can not be unplugged

   3) Place the level as far as possible

   4) components can be changed, the line should not be changed or from the connection.

   5) The Taiwan body must not be all or part of the reorganization, only according to specifications for a single component and with the original confirmation password.

5. the amplitude inside the code

   1) Do not adjust too large before or after the boot

   2) low-key amplitude of high amplitude modulation

   3) Control Panel Amplitude Knob placed in the middle position test items: placed to focus on the main point, reduce the left flat right.

   4) control Box: Can not be placed on the top or underground operation

6. Inside Code:

   1) reset when running or operating incorrectly

   2) Control The Reset method step, each inside code only set one time to save can

   3) usually must use the internal code can not be set randomly

7. Control Box:

   1) The connecting line of the body must be locked tightly after hanging

   2) the vibration direction switch and the output connection line are correspondence, can not connect the wrong

8. testing: Non-special test should use full wave test

9. the Taiwan body: can not produce the collision sound, the upper and lower center axis mutual touch will cause the spring steel piece rupture to be immediately shut down, amplitude modulation is adjusted small then turns on.

10. other unknown:

Do not arbitrarily change internal components and lines

11. the reason is bad:

   1) The use of computer models can not be used for shaking table control

   2) can not reload the driver

12. for the Ista-ia test, the operator to protect the sample, to prevent the test pieces slide out of the table;

13. gear gearbox replacement regularly;

14. Cut off all power when not working, keep clean; 5, non-staff can not operate at will;

Company Introduction
HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 20 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.