| Customization: | Available |
|---|---|
| Warranty: | One Year |
| Type: | Industrial Projector |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Items | Description |
| Cylinder-type device | Allow the component sample to freely bend and deform under applied load, ensuring the test surface pressure uniformity remains within ±5%. |
| Pressure Method | Gradually and uniformly increase load until reaching the set value, using both downward pressure and upward pull methods. |
| Max sample size | 2600*1400mm(L*W) |
| Cylinder Space | Cylinder space is adjustable |
| Cylinder Type | Low Friction |
| Cylinder Stroke | 400mm |
| Cylinder Quantity | 72 sets (12*6) Enable free adjustment of suction cup spacing in both horizontal and vertical directions at equal intervals. |
| Cylinder distance | Cylinder Center Point Distance≤20cm |
| Edge cylinder center distance from module edge≤20cm | |
| Deformation Detection | Infrared non-contact, deformation measurement range ±10 cm, accuracy ±0.5 mm, with 7 points that can be placed at any position within the same plan |
| DC Stabilized Power Supply | Powering 1 Module; DC Power Supply: 120V 5A. |
| Static Mechanical Load | Downward pressure: 800 Pa ~ 12,000 Pa; Upward pull: 800 Pa ~ 6,000 Pa; Setting at software |
| Dynamic Mechanical Load | Downward pressure: -2,500 Pa ~ +2,500 Pa(Setting at software) Cycle: 3~7 cycles/min |
| Deflection Detection | Laser non-contact Measurement range≥10cm Accuracy±0.5mm Measurement points: 5 point(can be placed at any position within the same plane) |
| Temperature Monitoring | Equipped one temperature sensor (OMEGA T-type thermocouple) Calibration point: 25°C |
Controller Controller |
Capable of storing operational data, equipped with a USB interface, enabling conversion of operational data into Excel/PDF files and charts. |
| Test pressure, cycle count, cycle duration, and energization current; each pressurization process is independently programmable: every test parameter for each cycle must be individually configurable. | |
| Each suction cup's pressure can be individually controlled, and pressure can be set separately. | |
| Including non-uniform snow loads, validated on top of previously delivered loads. | |
| Collect test pressure, time, module deflection, real-time cycle count, energized current, voltage, and module temperature data. The sampling frequency is configurable. | |
| Using Touchscreen control Control panel can display real-time test data curves; historical data and curves can be viewed on the control panel; historical data can be exported to Excel. |
|
| Safety Device | The air supply source equipped with a safety valve and status indicator lights. In the event of a test failure, the device will sound an alarm and halt the test. |
| Air source | 0.6~0.8Mpa(prepare by user) |
| Power | Single-phase, 220V, 50Hz |
| Machine Dimension | Approx.,3700*2000*2300mm(W*D*H) |
| Test Standard | |
| IEC 61215-2:2021 | MQT16 Static Mechanical Load Test |
| IEC 61215-2:2021 | MQT20 Dynamic Mechanical Load Test |
| ANSI/UL 1703:2018 | Mechanical Load Test |
| IEC 62782: 2016 | Dynamic Mechanical Load Test |
After-Service:
){kind=link}