Lab paint/ resins/plastics UVaccelerated weathering environment aging test machine/chamber
Product Introduction:
The fluorescent ultraviolet lamp, which can best simulate the UV spectrum of sunlight, and the temperature control and humidity supply devices are used to simulate the discoloration, brightness and intensity decrease of the material.
Cracking, peeling, pulverization, oxidation and other damaging sunlight (UV segment), such as high temperature, high humidity, condensation, dark cycle, and other factors, at the same time, through the synergistic effect between ultraviolet light and moisture, the single light resistance or single moisture resistance of the material weakened or failed, so it is widely used for the evaluation of the weather resistance of materials.
Advantage:
1. The equipment provides the best UV simulation of sunlight.
2. Low maintenance cost, easy to use.
3..The equipment adopts program controller to run the test cycle automatically, with high degree of automation.
4. Good lighting stability.
5. High recurrence rate of test results.
| Structural Features: |
| 1. The box is made of CNC equipment, with advanced technology, smooth lines and beautiful appearance. |
| 2. The box body is made of 304SUS advanced stainless steel plate and aluminum alloy frame with a thickness of 1.0mm. |
| 3. The heating method is tank heating, which is fast and evenly distributed. |
| 4. The air duct in the box adopts single circulation system, with one imported axial flow fan, which improves the air flow and heating capacity, and greatly improves the temperature uniformity of the test chamber. |
| 5. Water source and consumption: 8 l/day of clean water or distilled water. |
| 6. The drainage system USES return vortex type and U type sedimentation device to drain water, which is convenient for users to clean. |
| Light Source: |
| 1. 8 UV series fluorescent lamps with rated power of 40W are used as the light source, which are distributed on both sides of the machine with 4 lamps on each side. |
| 2. The distance between the sample surface and the UV lamp plane is 50 mm and parallel. |
| 3. There are UV-B313. UV-A340. |
| 4. The luminous spectral energy of UV -a340 lamp is mainly concentrated around the wavelength of 340nm. |
| 5. The luminous spectral energy of UV -b313 lamp is mainly concentrated around the wavelength of 313nm. |
| 6. Lamp tube: special ultraviolet lamp tube, 8 in 2 rows, 40W/ tube. |
| 7. Because of the fluorescent light energy output will gradually decay over time, in order to reduce the influence of caused by light energy attenuation test, all the eight in every quarter of the fluorescent lamp life, by a new lamp to replace an old lamp, so that UV light source is composed of the new lamp and old lamps, resulting in a constant output of light energy. |
Technical Parameters:
| Internal size |
650*1140*500mm(D*W*H) |
| External size |
700*1340*1800mm(D*W*H) |
| Exposure temperature |
50ºC-70ºC±2ºC, blackboard (black standard) temperature |
| Condensation temperature |
50ºC±2ºC (water temperature of humidified water tank) |
| Humidity range |
≥ 95% R.H |
| Distance between the sample and the lamp tube |
50±2mm |
| Center distance between lamp tubes |
70mm |
| Effective radiation test area |
7410000mm2 |
| Ultraviolet lamp wavelength |
290nm ~ 400nm(peak wavelength313nm,340nm, optional) |
| Test time |
1 ~ 9999s, m, h adjustable |
| Support samples |
within the available range of the inner box, support non-standard sample testing |
| Power requirements |
AC1 220V/50HZ single-phase three-wire system |
| Criteria |
In accordance with ASTM G154, GB/T16422.3-1997, GB/T14522, GB/T5170.9 standards. |
| Equipment conditions |
1. Ambient temperature 5ºC ~ +28ºC (the average temperature within 24 hours ≤28ºC) 2. Environmental humidity ≤85% 3.Do not place anything before or after the test box is placed. |
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
The introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
After-Service:
Should any issues arise during your testing process, we guarantee:
Timely Response: A formal reply within 48 hours.
Swift Resolution: A proposed solution within 3 working days.
Comprehensive Support: Access to English operation manuals, instructional videos, and video conference assistance.
Why Choose Us?
Global-Ready Design
Built-in voltage auto-switching (110V/220V), international plug compatibility, and safety-certified indicator protection.
Exceptional After-Sales Support
18-month comprehensive warranty. Industry-unique benefit: Complimentary repair service for controllers - even competitor units. Simply ship the controller to us.
Binding Quality Commitment
A formal Quality Assurance Letter accompanies every contract signing, guaranteeing performance and building trust.
Industrial-Grade Protective Packaging
(e.g., Triceratops) is individually wrapped in anti-static bubble film and secured in reinforced wooden crates. This ensures:
• Shock absorption & impact resistance
• Moisture & corrosion protection
• Non-toxic, odorless materials
• Optimal transparency for inspection
FAQ:Q: Are you a trading company or manufacturer?
A: Integrated manufacturer with 21+ years specializing in test equipment and 6 years of export expertise.
Q: What is your delivery timeline after order confirmation?
A:Standard orders: 10-25 working days
Stock orders: Ship within 3 days
Note: Lead times vary by product specifications and order volume.
Q: What are your warranty and after-sales service terms?
A:12-month comprehensive warranty on all testing machines
Industry-unique benefit: Complimentary controller repairs (including non-HAIDA units)
Post-warranty support: Dedicated technical team for troubleshooting, operational guidance, and complaint resolution
Q: How do you ensure product quality and service?
A:100% pre-shipment inspection with full performance testing
Global-ready design: Voltage auto-switching (110V/220V), international plugs, safety-certified indicators
Multi-tier training support:
✓ Instructional operation videos
✓ On-site engineer training (upon request)
Market-proven reliability:
Globally recognized by industrial users
Q: Do you offer product customization?
A: Yes, we develop tailored solutions based on your technical parameters and application requirements.
Audited Supplier 
){kind=link}