| Customization: | Available |
|---|---|
| Warranty: | One Year |
| Sample State: | Solid Material, Powder Mater |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DRL-S-HD Thermal Conductivity Tester (TPS Method)
Thermal conductivity tester based on transient plane heat source technology (TPS). This product is independently developed by AVIC Dingli Instruments. It has stable test performance and strong data processing and analysis capabilities. It can be used to measure the thermal conductivity of various types of materials. Measurement material types: metal, ceramic, alloy, ore, polymer, composite material, paper, fabric, foam plastic (insulation material and board with flat surface), polyurethane, phenolic, urea formaldehyde, mineral wool (glass wool, rock wool, mineral wool), cement wall, glass reinforced composite board CRC, cement polystyrene board, sandwich concrete, glass fiber reinforced plastic panel composite board, paper honeycomb board, etc.
1. Wide test range, stable test performance
2. Direct measurement, test time can be set from 5 to 160 seconds, can quickly and accurately measure thermal conductivity, saving a lot of time;
3. It will not be affected by contact thermal resistance like the static method;
4. Non-destructive testing of samples means that samples can be reused;
5. The probe is designed with a double helix structure, combined with a dedicated mathematical model, and uses the core algorithm to analyze and calculate the data collected on the probe.
|
Item
|
Parameters
|
|
Thermal conductivity range
|
0.00001~300W/(m*K)
|
|
Measuring temperature range
|
RT~130ºC
|
|
Probe diameter
|
Probe No. 1: φ7.5mm;
Probe No. 2: φ15mm |
|
Measuring time
|
5~160 seconds
|
|
Sample temperature rise
|
< 15ºC
|
|
Sample size
|
Probe No. 1 sample: ≥7.5*7.5*3.75mm;
Probe No. 2 sample: ≥15*15*7.5mm Note: Probe No. 1 measures thinner low-conductivity materials. If the surface of the sample to be measured is smooth and sticky, the sample can be stacked |
|
Test sample power P
|
Probe No. 1 power: 0
<1w; Probe No. 2 power: 0
|
|
Accuracy of measurement results
|
±3%
|
|
Control mode
|
Computer and software, software can export PDF Report, can export EXECL data
|
|
Protection system
|
Circuit with overload protection prompt
|
|
Sample testing clamps
|
Powder sample test container, liquid sample test cup, solid sample test fixture for optional
|
|
Power
|
AC 220V±10%, 50/60 Hz, 500W
|
About Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
){kind=link}