Plastics UV Accelerated Aging Test/Testing Machine
Description:
Plastic Quv accelerated weathering tester can simulate the harm caused by sunlight, rain and dew to the material, use the ultraviolet (UV) lamp to simulate the effect of sunlight, use the cold wet-like rain and dew.
The tested plastic material is placed at a certain temperature in a cycle of alternating light and moisture.
After a few days or weeks of testing, the damage seen outdoors can be reproduced for months to years.
Hazard types include: fading, discoloration, loss of light, silting, cracking, turbidity, foaming, embrittlement, strength degradation and oxidation.
In the QUV uv accelerated aging testing machine, the fluorescent uv lamp of the uv lamp can reproduce the effects of sunlight, and the condensation and water spraying system can reproduce the effects of rain and dew.
The temperature is controlled throughout the test cycle.
The typical test cycle is usually ultraviolet irradiation at high temperature and relative humidity at 100% dark moist condensation period.
Typical application in paint, automotive industry, plastic products, wood products, glue, etc
Technical Parameters:
| Studio size |
1140*400 *380mm(L*D*H) |
| Overall size |
1300*500 *1460mm(L*D*H) |
| Center distance of the lamp |
70mm |
| Distance of specimen from lamp surface |
The distance between the specimen and the nearest parallel surface of the lamp surface is about 50mm |
| Wavelength range |
UV-A wavelength range of 320 to 420nm
UV-B wavelength range of 275 to 320nm |
| Radiation intensity |
within 1W/m2/340nm |
| Temperature resolution |
0.1ºC |
| Light temperature range |
50ºC~70ºC / temperature tolerance is ±3ºC |
| Condensation temperature range |
40ºC~60ºC / temperature tolerance of ±3ºC |
| Measuring range of blackboard thermometer |
30~80ºC / tolerance is ±1ºC |
| Temperature control mode |
PID self - tuning temperature control mode |
| Humidity range |
about 45%~70% R.H. |
| Water tank requirements |
water depth not more than 50mm, and with an automatic water supply controller |
| Standard specimen size |
75×150mm 48pcs |
| Recommended operating environment |
5~35ºC, 40%~85%R•H, 300mm away from the wall |
| Voltage |
220V±5%, single-phase three-wire, 50Hz, 10A, required 15A leakage switch |
(The table parameters for the company Standard Model parameters, we support customer customization parameters)
Temperature Control System:
UV cycle:
In the process of UV exposure test, temperature control is very important, and more important is to match the test temperature used in the accelerated test with the maximum temperature of the material in the practical application.
The UV temperature setting in the equipment can be anywhere from 50C to 70ºCC, depending on the level of illumination and indoor ambient temperature.
The temperature adjustment of the equipment is accomplished by a controller with microcomputer function to command a series of systems such as air heater, water heater and so on in the equipment.
Moisture circulation:
As the temperature increases, the destructive power of moisture on the material increases dramatically.
Therefore, in the process of wet exposure, temperature control is the most basic requirement.
Furthermore, to produce an acceleration effect, it is necessary to maintain a high temperature environment during the wet exposure.
The condensation temperature in the device can be set from 40ºC to 60ºC at any point.
Heating system:
U - type high - speed heating tube of titanium alloy is used
Temperature control and lighting completely independent system
The temperature control output power is calculated by microcomputer to achieve high accuracy and high efficiency
It has the function of preventing over-temperature of heating system.
Product Features:
1.Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2.To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3.Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
4.Irradiation intensity control: optional
The accurate and repeatable test results can be obtained by selecting the radiation intensity control components.
The light intensity control system allows the user to set different light intensity according to different test requirements.
The irradiation intensity is precisely controlled by its feedback loop device.
Also can extend the service life of fluorescent lamp at the same time
The Introduction of Haida
Haida products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields. Our products meet UL, ASTM, JIS, GB,SO, TAPPI, EN, DIN, BS and other domestic and international standards.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
After-service:
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-con.
Customer Feedback:
FAQ:
Q:Are your company a trading one or a factory?
A:Factory + trade (integration),More than 12 years focusing on test equipment field,6 years exporting experience.
Q:After an order is placed, when to deliver?
A:Generally about 10-25days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q:What about the warranty with after - sales services?
A:The testing machine is guaranteed for 12 months by HAIDA,we can help you to repair
your problem controller freely,even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.
Q:What about the product' services and quality?
A:Each equiopment must be carried out 100% quality examination and test when shipping and delivery goods. Product use training, each of our product provide video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A :Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
Audited Supplier 
){kind=link}
){kind=link}